Oxidation
Degreasing
Electronic & Semicon cleaning
Oxygen parts cleaning
Particles removal
Additive manufacturing
Polishing products,Polymers & Resins removeal
Rinsing & Drying solvents
Conformal coatings
Nano(Epilame) coatings
Ultra-thin coatings
- Matal & Powders
- Semicon solder solutions
- Smt solder pastes
- Soldering & Tinning fluxes
- Rework & Repair solutions
ADVANTAGES
There are several functional as environmental & cost advantages to de-water with solvents.
- Faster drying (5 minutes vs 30 minutes)
- Less energy usage
- Guaranteed water removal under low-stand-off components in electronics
- Guaranteed water removal in difficult to reach complex geometrical shapes of mechanical parts.
- Spot-free drying for high quality parts
- No risk to damage heat sensitive parts
- No risk for corrosion by residual water
- Solvent for rinsing & spotless fast drying
- Co-solvent cleaning & drying process
- Very low HSE impact
Especially designed to replace rinsing solvents with a high HSE impact and to offer a product in accordance with the latest and future environmental regulations. It is used in combination with our TOPKLEAN™ range to offer an environmentally friendly solvent solution without compromising on high cleaning performance. The very low surface tension allows to penetrate very tight spaces, making sure any cleaning chemistry is fully removed after rinsing.
SPECIFICATIONS
| SPECIFICATIONS | VALUES | METHODS |
|---|---|---|
| Aspect | Transparent, colorless | Visual |
| Methoxy-nonafluorobutane ethers (%) | 94% +/- 1.0 Internal | MO.SB.10033 |
| Isopropanol (%) | 6% +/- 1.0 Internal | MO.SB.10033 |
CHARACTERISTICS
| CHARACTERISTICS | VALUES |
|---|---|
| Boiling point (°C / °F) | 55°C / 131°F |
| Freezing point (°C / °F) | -135°C / -211°F |
| Flash point | No |
| Density (g/cm3) | 1.48 |
| Purity (% weight) | >99.5 |
| Surface tension (dynes/cm) | 14.5 |
| Vapor pressure (kPa) | 27.6 |
| Dynamic viscosity (mPa.s) | 0.75 |
| Latent heat of vaporization (kJ/kg@bp) | 165 |
| Specific heat (kJ/kg.K) | 1.17 |
- Solvent for rinsing & spotless fast drying
- Co-solvent cleaning & drying process
- Solubilization of silicon & fluorinated lubricants
PROMOSOLV DR3 is especially designed to replace rinsing solvents with a high HSE impact and to offer a product in accordance with the latest and future environmental regulations. It can be used in combination with our TOPKLEANTM range to offer an environmentally friendly solvent solution for degreasing without compromising on high cleaning performance. The very low surface tension allows to penetrate very tight spaces, making sure any cleaning chemistry is fully removed. Additionally it can be used to solubilize fluorinated and silicon lubricants.
SPECIFICATIONS
| SPECIFICATIONS | VALUES | METHODS |
|---|---|---|
| Aspect | Colorless, clear | Visual |
| Ether methoxy-nonafluorobutane (%) | > 99,5 Internal | MO.SB.10033 |
CHARACTERISTICS
| CHARACTERISTICS | VALUES |
|---|---|
| Boiling point (°C / °F) | 61°C / 142°F |
| Freezing point (°C / °F) | -135°C / -211°F |
| Flash point | No |
| Density (g/cm3) | 1.52 |
| Surface tension (dynes/cm) | 13.6 |
| Vapor pressure (mm Hg) | 202 |
| Dynamic viscosity (mPa.s) | 0.75 |
| Latent heat of vaporization (kJ/kg@bp) | 165 |
| Specific heat (kJ/kg.K) | 1.17 |
Promosolv™ DR1
Promosolv™ DR1
- Solvent for rinsing & spotless fast drying
- Co-solvent cleaning & drying process
- Very low HSE impact
Especially designed to replace rinsing solvents with a high HSE impact and to offer a product in accordance with the latest and future environmental regulations. It is used in combination with our TOPKLEAN™ range to offer an environmentally friendly solvent solution without compromising on high cleaning performance. The very low surface tension allows to penetrate very tight spaces, making sure any cleaning chemistry is fully removed after rinsing.
SPECIFICATIONS
| SPECIFICATIONS | VALUES | METHODS |
|---|---|---|
| Aspect | Transparent, colorless | Visual |
| Methoxy-nonafluorobutane ethers (%) | 94% +/- 1.0 Internal | MO.SB.10033 |
| Isopropanol (%) | 6% +/- 1.0 Internal | MO.SB.10033 |
CHARACTERISTICS
| CHARACTERISTICS | VALUES |
|---|---|
| Boiling point (°C / °F) | 55°C / 131°F |
| Freezing point (°C / °F) | -135°C / -211°F |
| Flash point | No |
| Density (g/cm3) | 1.48 |
| Purity (% weight) | >99.5 |
| Surface tension (dynes/cm) | 14.5 |
| Vapor pressure (kPa) | 27.6 |
| Dynamic viscosity (mPa.s) | 0.75 |
| Latent heat of vaporization (kJ/kg@bp) | 165 |
| Specific heat (kJ/kg.K) | 1.17 |
Promosolv™ DR3
Promosolv™ DR3
- Solvent for rinsing & spotless fast drying
- Co-solvent cleaning & drying process
- Solubilization of silicon & fluorinated lubricants
PROMOSOLV DR3 is especially designed to replace rinsing solvents with a high HSE impact and to offer a product in accordance with the latest and future environmental regulations. It can be used in combination with our TOPKLEANTM range to offer an environmentally friendly solvent solution for degreasing without compromising on high cleaning performance. The very low surface tension allows to penetrate very tight spaces, making sure any cleaning chemistry is fully removed. Additionally it can be used to solubilize fluorinated and silicon lubricants.
SPECIFICATIONS
| SPECIFICATIONS | VALUES | METHODS |
|---|---|---|
| Aspect | Colorless, clear | Visual |
| Ether methoxy-nonafluorobutane (%) | > 99,5 Internal | MO.SB.10033 |
CHARACTERISTICS
| CHARACTERISTICS | VALUES |
|---|---|
| Boiling point (°C / °F) | 61°C / 142°F |
| Freezing point (°C / °F) | -135°C / -211°F |
| Flash point | No |
| Density (g/cm3) | 1.52 |
| Surface tension (dynes/cm) | 13.6 |
| Vapor pressure (mm Hg) | 202 |
| Dynamic viscosity (mPa.s) | 0.75 |
| Latent heat of vaporization (kJ/kg@bp) | 165 |
| Specific heat (kJ/kg.K) | 1.17 |
Benefits
PERFORMANCE
- Thermal and chemical stable in use
- The very low surface tension allows deep rinsing of parts with complex geometry
- Short rinsing and drying times
COST
- Continuous recycling in equipment for a long bath-life
- Can be returned for recycling and re-use
- The relative high boiling point reduces risk of solvent drag, so limiting consumption
HSE
- Very low toxicity (refer to the SDS)
- No Ozon Depletion Potential (ODP) & low Global Warming Potential (GDP)
- Non-flammable